MAECX-ZKFK-01 vacuum sealing machine

The MD-ZKFK-01 soft-pack battery vacuum pre-sealing machine is used for vacuuming and hot-pressing pre-sealing of soft-packed (medium and small size) lithium batteries after liquid filling and standing; this machine accurately controls the main vacuum pumping box and Pneumatic heat sealing components, automatically complete the vacuum heat sealing of the battery aluminum-plastic shell.

Electrical parameters
Maximum power	Using 300w heating tube, the power consumption when heating is about 0.6KW
Head temperature	Room temperature~250℃, temperature adjustable
Temperature control accuracy	±2℃
Edge width	5mm
Head parallelism	Use triple carbonless copy paper, seal head pressure at 0.6MPa and temperature at 200℃, the seal will be uniformly pressed
Maximum sealing size	200mm, thickness 2~6mm
Diameter of heat-sealed cylinder	63mm
Heat sealing pressure	0~7Kg/cm² adjustable
Heat sealing time	0~99 seconds adjustable
Vacuum	-90Kpa~0 adjustable
Air consumption	About 0.2L compressed gas / once per seal
Air compressor working speed	≥180 times/hour
Parallel clearance when the upper and lower heads are joined	≤0.03mm