MACEX-CXJ-03 aluminum plastic film forming machine

This forming machine adopts imported pneumatic and electrical components to control the press forming mold of the pressurized cylinder, so that the aluminum plastic film can be formed at one time. The mold is made of imported materials, and the stretched product has a beautiful appearance and smooth rounded corners. The console is equipped with a safety grating protection device, if the operator crosses the safety range, it will automatically stop automatically.

Electrical parameters
Compressed air	≥0.6MPa
Applicable specifications	Maximum punching pit size: 150x120mm (the largest punching pit size is not limited according to customer requirements); depth ≤ 6mm
Standard punching pit size	62x46mm; aluminum plastic film specification length 205mm; width 120mm
Aluminum plastic film thickness	0.1-0.2mm (The design gap between 0.1 and 0.2 molds is different)
Booster cylinder	5T
Stretching cylinder	0.2T
Feeding method	Manual
Parallelism between the lower plane of the mold and the bottom plate	0.02mm
Equipment capacity	200- 400EA/H
Mold part	Flatness of upper and lower molds: 0.02mm
	Flatness of mold core: 0.02mm
	Mold & mold core roughness: 0.8 (mirror polished)
	Stretching module gap: 0.2—0.35mm (depending on material requirements)
Product acceptance criteria	After the shell is punched, the appearance of the product has no damage, scratches, no cracks in the corners, the corner depth deviation is ≤±0.05 mm, the punching size deviation is ≤±0.05mm, and the effective part is smooth and wrinkle-free.