Ultrasonic wire splicing machine

1,Equipped with high-performance ultrasonic metal spot welding　power supply, automatically tracking the frequency of the　transducer,　with two control modes of time and energy;
2,Ultrasonic welding has low requirements on the metal surface, no　need to scrape the oxide layer or electroplating layer, and the welding efficiency and quality are high;
3,The welding material does not need to be melted, does not change the material characteristics, and has no pollution can realize the welding between different metal materials, such as nickel+copper,copper+aluminum,nickel+aluminum,etc.;
4,After welding, the metal material conducts electricity, has good thermal conductivity, and extremely low resistivity, which is suitable for welding of conductive materials.
5,The welding time is short, without any flux, shielding gas and filler

Application material:

Stainless steel,　carbon steel,　general alloy steel,　gold,　silver,　iron.　aluminum, alloy, steel, diamond welding between the same　materials or welding of different materials.

• 型号规格	MACEX-ＸＳＢＷ2030		MACEX-ＸＳＢＷ2040		MACEX-ＸＳＢＷ２０５０
  Ultrasonic frequency	20KHz
  工作电压	AC220V/50Hz
  超声功率Ultrasonic power	3000W		4000w		５000W
  工作气压Air pressue	0.4MPa~0.6MPa
  操作界面	4.3寸/7寸触摸屏
  控制模式	时间/能量/高度
  最大焊接行程	30mm
  机架尺寸	５００*３００*２00mm	６00*３００*２３０mm		６00*３００*２３０mm
  电箱尺寸	450*135*140mm
  总重量	８0kg	90kg		１１０ｋｇ